Bimetal bandsaw blade made of a high chrome alloyed tenacious backing material and a HSS cutting edge made of HSS M42 / material No. 1.3247 with a cobalt content of 8% and a hardness of approx. 68 HRc. M42 blades are available with an aggressive positive cutting angle and is designed to cut solids and tubes and structural's on 2-column and swing type machinery with low vibrations. The advantages of this blade are an easy cutting behaviour with good chip formation and smooth cutting. All in all, this leads to an increase in life time compared to standard Matrix bimetal bandsaw blades, which we no longer offer.
|
M42 BANDSAW BLADES: Specifactions and Tooth options | |||||||||||||
|
Width |
6 mm 1/4" |
10mm 3/8" |
13mm 1/2" |
20mm 3/4" |
27mm 1" |
34mm 1 1/4" |
41mm 1 1/2" |
54mm 2" |
54mm 2" | ||||
|
Gauge M |
.65 |
.9 |
.65 |
.9 |
.50 |
.65 |
.9 |
.9 |
.9 |
1.1 |
1.3 |
1.3 |
1.6 |
|
Gauge IMP |
025" |
035" |
025" |
035" |
020" |
025" |
035" |
035" |
035" |
042" |
042" |
050" |
063" |
|
Tooth Pitch |
6H 10 14 10-14 |
6H 10-14 |
4H 6H 10-14 |
10 14 18 24 |
3H 4H 6H 6-10 8-12 10-14 14-18 |
3H 4H 6H 10-14 |
3H 4H 6R 4-6 5-8 6-10 8-12 10-14 |
2H 3H 4R 6R 8 10 14 2-3 3-4 4-6 5-8 6-10 8-12 10-14 |
3H 3H 4R 6R 2-3 3-4 4-6 5-8 6-10 8-12
|
2H 1.5-2 2-3 3-4 4-6 5-8
|
1.5-2 2-3 3-4
|
.75-1.25 1.5-2 2-3 3-4
| |